This is an outdated kit, no longer available.
After a lot of search, finally I’ve found a USB/SD video player kit.
This kit is priced a bit high at 480Rs(as of 09/2011), which seemed to be loot when I was buying this, but later it is realized how useful is this.
The kit consists of a mainboard, one interface board, one display board and one remote.
Interface board: This board consists of HT1628 IC which is a DVD LED Driver IC. The mainboard connects to this board with a ribbon cable and this board consists of IR sensor and display. Another ribbon cable connects this board with the interface board which has 6 keys and LEDs for the panel.
Main Board: The mainboard has two main ICs, one is Zoran ZR36988 DVD processor IC, and another is W9864G RAM. There is an LM1117-3.3 voltage regulator on board which provides 3.3V supply for all the internals. There are a few small ICs like video amplifier, FM receiver, etc.
The Zoran ZR36988 IC is a variant of the popular Zoran 36888 IC, which is a DivX certified media player IC. It supports playback of JPEG, MP3, WMA, and MPEG-1/2/4 files and the IC provides HDMI output, true 5.1channel output, etc extraordinary features.
Though in the board those features were not implemented and there is only stereo audio and video output enabled for TVs.
More information about the IC: http://zoran.com/spip.php?page=imprimer&id_article=54 ( Link now dead )
There is connector for both SD/MMC cards and USB port in the board. I’ve tested this board with my USB pendrive and MP4 and AVI video playback i good enough.
The IC is also used in modern DVDs so there would not be any problem in finding the IC if it damages. I guess that IC will cost around 250-300Rs.
kaushik says
Such kits are waste of money ... as long as itz hobby u can spend .Reasons
1.Amkette or other HD players come all readymade in 1500Rs . Why waste your money in 2 pieces of boards , Cost breakup is as follows 400boards +120 powersupply + casing 200Rs =800Rs box that looks like a tiffin box and plays ONLY few files , no remote , no LCD displays + Add LCD 800Rs = 1600Rs with all pain and labour what we will get , people dunt see these , only boards don’t make any useful thing
Arup says
We belong to the group of people who loves to make things for explorations. Looks like you are only behind money factor.
arihant says
hi ,
kaushik , let me know about ready made HD players which are available in the market and perform the same function as this device do.. means it directly attach to the tv and also not show any firmware. IF you know the SAME let me know about that..REPLY ASAP..
papai says
Hi anup
I got the kit with zoran 36966 ic which is a one pcb complete kit with an excellant front panel here in my locality.it is also available at chadney chowk kolkata.it cost here around 400 rs.who they want to make it can avail this board now.@kaushik nothing is sweeter than own effort.@thanx buddy keep going
Arup says
Hi papai, can you share the address of the shop in Chandni here? It will help many people.
sanjay says
can you provide me detail connection for output i.e sound and video connection. As i have seen this card it has provided two ribbon cable and two port connector but which are the sound and video wires i could not make it.
Arup says
There are labels in PCB indicating the output pins.
papai says
it available in evry big retail shop at chadney ( i puchased from gemini)
vijay says
very good work mr.Arup
i want assemble one for me
i am in chennai i will try to get this pcb
best wishes
vijay says
Mr.Arup will it play Xvid files
what are the video formats supported
tanks
Arup says
Yes, it did (afair).
Shashank says
Hi Arup,
I am based in Mumbai. Can U tell me where can I find a ready to use (without assembling) USB media player within 1000 Rs. If U R based in Mumbai can u arrange one for me.
regs
Shashank
Arup says
I'm not based in Mumbai, but I can send you one.
Bikash says
If you kindly make me know that how can i connect this mp4 kit to an amplifire for audio output & to T.V. for video output?
Bikash says
hi anup,can u pablish the connection diagram or the image of boards connected with ribon wires.that will be enough.becaus i can not understand the markings in the board.
Arup says
Click on the images above and after the image loads, then click 'F' on keyboard to see the images in huge size.
Pravin says
Hey, I get this kit in Ulhasnagar for Rs.400/- with all set like it has inbuilt USB, Display Panel, all buttons with Remote control. I just used Nokia charger for 5V current and its works. I tested .dat, .VOB (DVD Format), AVI format, .mpg format and all these formats are running. Video quality is superb.
manish says
hi...can u help me find the kit which u have in lamington road mumbai....also tell me if i can find it under anther name....reply..
Rathnam says
Hi,
I am from Hyderabad.
what will be the kit name. On what basis I can search. Please send picture of the kit if possible. waiting for your reply
MeHuL says
Hi...Arup.
its been nice reading ur post.
im from gujarat,
for finding out such kind of circuits on big electronics shop,
what should i tell to the wender?
Means.. i should specifie the IC or purpose?
mehul says
hey Arup,,
great work u have done...
i cant find out such board on internet
can you help me in finding out which other such video decoding boards available in market..
pls tell if they are available on online shopping..or etc
Arup says
I guess you can't buy these in FlipKart, or eBay. Contact me, I'll arrange for you if you can't find these.
vijay says
hey Arup,,
great work u have done…
i also bought one mp4 player kit, when i connected 5v ps to the board it became on showing display as "set" but after few seconds display get blank and 5v power supply became 3.6v.my ps is of 1 amp. rating.pl.help me solving this problem.
Arup says
Check for shorts in USB connection and try to power it on without card reader/usb drive as they may be drawing much power than the board can supply.
teckaddikt says
hi arup,
thanks for the information.
i want a usb video player which do not show any firmware and i also want to eliminate the loading, initialization things which are comes at the time of initialization of player.
And 1 more thing that the video which is in the usb always in repeat mode.
it would be great if you made this for me.
REPLY ASAP
THANKS
Arup says
I don't design these players. 🙂
teckaddikt says
no problem..
but let me know can i get the same player which play HD quality video...
please reply asap..:)
Arup says
There are some branded ones that play HD video. Just search for USB media player in eBay.
arihant says
can i get the same player which play HD content..
arihant says
as per your saying ARUP i 'll buy a media player which play the HD content but when they start they show company name but i don't want that...
so please tell me the solution for this...
Makarand says
Hi, I want to buy the complete Kit. Please tell me the address of dealer / shop in WARDHA CITY (M.S.).
Rathnam says
Hi Arup,
do you have any idea where can I get this kit in PUNE.
Thanks
Manoj says
Hi Arup My DVD Player board got demaged i got a replacement TAI8252RD Board . as per data it supports both WTP AD01 Lens as wellas Sony 313 Lens , however on connecting i found that my board worked only with sony 313 lens,
i want to know if somehow i can use the wtp aD 01 lens in this board.